Eşyalarını Tamir Et Topluluk Mağaza

Remplacement de la carte mère du Sony Alpha SLT-A55V

Kılavuza Dön
İngilizce
Fransızca
Adım 5
Sony Alpha SLT-A55V Motherboard Replacement: adım 0, 1 resimden 1.

  • Remove the black plastic sticker on top of the camera.

  • This sticker can be re-used. Peel the sticker off and place it on a clean piece of parchment paper or wax paper. This will prevent dirt and dust from getting on the adhesive.

  • Remove the two screws that lie beneath the sticker. The arrows indicate the location of these screws.

Sur le dessus de la caméra, il y a un autocollant en plastique noir qui cache deux vis qui doivent être retirées.

Cet autocollant peut être réutilisé. Décollez l'autocollant et placez-le sur un morceau de papier sulfurisé ou de papier ciré propre. Cela empêchera la saleté et la poussière de pénétrer sur l'adhésif.

Retirez les deux vis qui se trouvent sous l'autocollant. Les flèches indiquent l'emplacement de ces vis.

-[* black] On the top of the camera there is a black plastic sticker that hides two screws which must be removed.
-[* black] This sticker can be re-used. Peel the sticker off and place it on a clean piece of parchment paper or wax paper. This will prevent dirt and dust from getting on the adhesive.
-[* black] Remove the two screws that lie beneath the sticker. The arrows indicate the location of these screws.
+[* black] Remove the black plastic sticker on top of the camera.
+ [* icon_note] This sticker can be re-used. Peel the sticker off and place it on a clean piece of parchment paper or wax paper. This will prevent dirt and dust from getting on the adhesive.
+[* red] Remove the two screws that lie beneath the sticker. The arrows indicate the location of these screws.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.