Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 3 kılavuzları etkileyecektir.
Adım 2 çevriliyor
Adım 2
-
With the three screws removed, take note of the two ribbon cables connecting the lens assembly to the main motherboard.
-
Use the tweezers to remove the two green strips of tape protecting the connectors.
-
Use the plastic opening tool to release the black clips locking in the ribbon cables, then use the tweezers to gently pull the ribbon cables away from the main motherboard.
[* red] With the three screws removed, take note of the two ribbon cables connecting the lens assembly to the main motherboard. | |
- | [* red] Use the tweezers to remove the two green strips of tape protecting the connectors. |
+ | [* red] Use the [product|IF145-020|tweezers] to remove the two green strips of tape protecting the connectors. |
[* red] Use the plastic opening tool to release the black clips locking in the ribbon cables, then use the tweezers to gently pull the ribbon cables away from the main motherboard. |
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.