Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 33 kılavuzları etkileyecektir.

İngilizce
İspanyolca

Adım 3 çevriliyor

Adım 3
Lift the fan out of the mini for enough clearance to access its connector. Grab all the wires at once and gently pull straight up to disconnect the fan from the logic board. Do not pry at the socket, or you may rip it from the logic board.
  • Lift the fan out of the mini for enough clearance to access its connector.

  • Grab all the wires at once and gently pull straight up to disconnect the fan from the logic board.

  • Do not pry at the socket, or you may rip it from the logic board.

  • Remove the fan.

Levanta el ventilador de la mini para tener suficiente espacio para acceder a su conector.

Toma todos los cables y gentilmente tira para desconectar el fan de la placa lógica. Alternativamente, desliza un spudger debajo de los cables y empuja hacia arriba para destrabar el conector.

No hagas palanca en el zócalo, o lo arrancarás de la placa logica.

Remueve el ventilador.

[* black] Lift the fan out of the mini for enough clearance to access its connector.
[* black] Grab all the wires at once and gently pull '''straight up''' to disconnect the fan from the logic board. Alternatively, slide a spudger underneath the wires and pry up to disengage the connector.
[* icon_caution] Do '''not''' pry at the socket, or you willmay rip it from the logic board.
[* black] Grab all the wires at once and gently pull '''straight up''' to disconnect the fan from the logic board. Alternatively, slide a spudger underneath the wires and pry up to disengage the connector.
[* icon_caution] Do '''not''' pry at the socket, or you willmay rip it from the logic board.
[* black] Remove the fan.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.