Eşyalarını Tamir Et Topluluk Mağaza

Remplacement du ventilateur du Gateway 3545GZ

Önceki adım

Adım 2 çevriliyor

Kılavuza Dön
İngilizce
Fransızca
Adım 2
Gateway 3545GZ Fan Replacement: adım 0, 3 resimden 1. Gateway 3545GZ Fan Replacement: adım 0, 3 resimden 2. Gateway 3545GZ Fan Replacement: adım 0, 3 resimden 3.

  • Unscrew the four screws holding it in place with the same PH1 Phillips-Head screwdriver. They are numbered on the fan, 1,2,3,4.

  • The four screws are 12mm long, they also have a spring surrounding them.

  • Then carefully pull the cord connecting the fan to the notebook.

  • Insert your replacement fan, plug in its cord, screw it into place, and reattach the protective cover.

Dévissez les quatre vis qui le maintiennent avec le même tournevis à tête cruciforme Ph1. Elles sont entourés sur l'image.

Les quatre vis ont une longueur de 12 mm, elles ont également un ressort qui les entoure.

Ensuite, débranchez soigneusement le câble reliant le ventilateur à l'ordinateur portable.

Insérez votre ventilateur de remplacement, branchez son câble, visser-le et revissez le cache de protection.

[* red] Unscrew the four screws holding it in place with the same PH1 Phillips-Head screwdriver. They are numbered on the fan, 1,2,3,4.
[* icon_note] The four screws are 12mm long, they also have a spring surrounding them.
-[* black] Then carefully pull the cord connecting the fan to the notebook.
+[* orange] Then carefully pull the cord connecting the fan to the notebook.
[* black] Insert your replacement fan, plug in its cord, screw it into place, and reattach the protective cover.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.