Skip to main content
İngilizce
Japonca

Adım 3 çevriliyor

Step 3
Remove the main circuit board by gently lifting it up from the back and pulling away from the front of the printer.
  • Remove the main circuit board by gently lifting it up from the back and pulling away from the front of the printer.

  • Be careful not to lift to fast, as doing so can cause damage to the main circuit board.

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.