iPod Touch 6th Generation Display Assembly Replacement

Adım 10 çevriliyor

İngilizce

Fransızca

Adım 10

LCD Shield Plate

Carefully fold the display over away from the rest of the iPod, watching out not to disconnect or break any of the ribbon cables. Set the two halves flat on a flat surface
Use a plastic opening tool to pry the home button switch up from the LCD Plate
You may need to use a heat gun or hair dryer to soften the adhesive on the back of the home button. (Use a low heat setting)
Do not try to remove the home button switch, because it is connected to components below the LCD plate.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.