-
There are three notches on either side of the battery. In the next steps, you will be using these notches to gradually pry the battery up from the rear case.
-
The battery is secured with a lot of adhesive, so you'll need to go slowly and carefully to avoid puncturing or creasing the battery.
-
Insert a plastic opening tool into the top right notch and gently pry up on the battery.
-
Don't try to attempt to pry up the entire battery at this point, just slowly start to loosen the adhesive at each point.
-
Continue with the lower right notch. Insert a plastic opening tool into the notch, and gently lift up on the side of the battery.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.
Kılavuz Adımlarını Düzenlemek için Klavye Kısayolları:
Ctrl + N
Bir sonraki satır
Ctrl + P
Bir önceki satır
Ctrl + Shift + N
Aşağıya yeni bir satır ekle
Ctrl + Shift + P
Yukarıya yeni bir satır ekle
Ctrl + ]
Mevcut satırı girintili yap
Ctrl + [
Mevcut satır girintisini kaldır
Ctrl + D
Mevcut satırı sil
Shift + ;
Sonraki adıma git.
Shift + H
Önceki adıma git.
Bütün kısayolları göster