Eşyalarını Tamir Et Topluluk Mağaza

GoPro HD Hero2 Tausch der hinteren Gehäuseschale

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 6 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Almanca
Adım 4
GoPro HD Hero2 Rear Case Replacement: adım 0, 2 resimden 1. GoPro HD Hero2 Rear Case Replacement: adım 0, 2 resimden 2.

  • Using a plastic opening tool or your fingernail, flip up the locking tab on the SD board ribbon cable ZIF connector on the motherboard assembly.

  • Be careful that you are prying on the locking tab, and not the connector itself.

  • Use a pair of tweezers to remove the SD board ribbon cable from its connector on the motherboard.

Nutze das Plastiköffnungswerkzeug oder einen Fingernagel und kippe den Sicherungsbügel des ZIF-Stecker des Flachbandkabels des SD-Board auf dem Motherboard nach oben.

Sei vorsichtig, dass du nicht an dem Anschluss selbst, sondern nur am Sicherungsbügel hebelst.

Nutze eine Pinzette, um das Flachbandkabel des SD-Boards aus seinem Anschluss auf dem Motherboard zu entfernen.

[* black] Using a plastic opening tool or your fingernail, flip up the locking tab on the SD board ribbon cable ZIF connector on the motherboard assembly.
[* icon_caution] Be careful that you are prying on the locking tab, and not the connector itself.
-[* black] Use a pair of tweezers to remove the SD board ribbon cable from its connector on the motherboard.
+[* black] Use a pair of [product|IF145-020|tweezers] to remove the SD board ribbon cable from its connector on the motherboard.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.