Eşyalarını Tamir Et Topluluk Mağaza

GoPro HD Hero2 のリアケースの交換

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 6 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Japonca
Adım 4
GoPro HD Hero2 Rear Case Replacement: adım 0, 2 resimden 1. GoPro HD Hero2 Rear Case Replacement: adım 0, 2 resimden 2.

  • Using a plastic opening tool or your fingernail, flip up the locking tab on the SD board ribbon cable ZIF connector on the motherboard assembly.

  • Be careful that you are prying on the locking tab, and not the connector itself.

  • Use a pair of tweezers to remove the SD board ribbon cable from its connector on the motherboard.

プラスチックの開口ツールや指の爪を使って、マザーボード上のSDボード用リボンケーブルのZIFコネクターに留められたロック用タブを持ち上げます。

ロック用のタブを持ち上げてください。コネクター自体には触らないでください。

ピンセットを使って、SDボードのリボンケーブルをマザーボードのコネクターから取り出します。

[* black] Using a plastic opening tool or your fingernail, flip up the locking tab on the SD board ribbon cable ZIF connector on the motherboard assembly.
[* icon_caution] Be careful that you are prying on the locking tab, and not the connector itself.
-[* black] Use a pair of tweezers to remove the SD board ribbon cable from its connector on the motherboard.
+[* black] Use a pair of [product|IF145-020|tweezers] to remove the SD board ribbon cable from its connector on the motherboard.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.