Sony NEX-5T E-Mount Replacement

İngilizce

Korece

Adım 2 çevriliyor

Adım 2

You may need to apply adequate force to remove these screws and be careful not to strip them as they are relatively weak.
Using a PH0 Philip’s screwdriver, unscrew and remove the four 1.2mm Philip’s screws on the front of the E-mount.
These screws are very small so make sure you do not misplace them.
If a screw is stripped, you will need to refer to the ifixit stripped screw removal guide

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.