Adım 19 çevriliyor
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.
Desolder all 12 of the motor wires that connect to the drones mother boards.
DO NOT cut the cables with wire cutters—they are enameled wire and are a pain in the butt to solder back together and have them still work. Do yourself a favor and just desolder them from the board.
For reassembly, note the order of the cables. While the drone is upside down, black is the top wire, grey is middle, and white is bottom.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.
Bir sonraki satır
Bir önceki satır
Aşağıya yeni bir satır ekle
Yukarıya yeni bir satır ekle
Mevcut satırı girintili yap
Mevcut satır girintisini kaldır
Mevcut satırı sil
Sonraki adıma git.
Önceki adıma git.
Yardım'ı Aç