Ana içeriğe geç

iPhone 8の分解

İngilizce
Japonca
Adım 9
iPhone 8 Teardown: adım 0, 3 resimden 1. iPhone 8 Teardown: adım 0, 3 resimden 2. iPhone 8 Teardown: adım 0, 3 resimden 3.
  • As our quest continues, we find some quirky cables and brackets!

  • First out: a new Lightning port bracket that seems to reinforce the new peach-colored port and trap the Taptic engine.

  • Up to now, we've gleefully plugged along with our Phillips screwdriver—but alas, all good things must come to an end. In removing this bracket, we encountered our first tri-point screw. Still, it's no match for our 64 Bit Driver Kit!

  • We suspect that the newly colored Lightning port could be made of a heat-transferring plastic to allow for safer fast-charging. (Or, it could just be color-matched to the chassis.)

  • Next: a strange interconnect/antenna cable over the speaker.

  • Finally: the Taptic Engine nestled in a series of tiny fiddly connectors.

私たちの探索はまだまだ続きます。次に変わったケーブルとブラケットを幾つか見つけました

まず最初に取り出します:Lightningポートのブラケットは新しいピーチ色のポートを補強して、Taptic engineを挟んでいるように見えます。

これまでのところ、嬉しいことにプラスドライバーのみで進んできましたーしかし嬉しいことはそう長くは続きません。このブラケットを取り出すには最初のトライポイントネジが待ち受けているのです。でもiFixitの64 Bit Driver Kitで事足りないものはありません!

新しく登場した色付きのLightning ポートは高速充電を安全に行うための伝熱プラスチックではないかと推測します。(もしくは、ただ単に筐体と色を合わせただけかもしれません)

次の作業:奇妙なインターコネクト/アンテナケーブルがスピーカーを覆っています。

最後の作業:Taptic Engineが小さくて精密なコネクターの中に入っています。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.