HTC Vive フェイスレストの交換

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 7 kılavuzları etkileyecektir.

Adım 1 çevriliyor

İngilizce

Japonca

Adım 1

Unscrew the head strap mounts

Be sure to power down and disconnect your Vive before beginning.
Use a T5 Torx driver to remove the two 12 mm-long screws securing the head strap mounts on either side of the headset.
For some devices, a T6 Torx driver may work better.
The mounts may fall off when the screws are removed, so be careful not to lose any parts.

作業を始める前に、必ず電源を切り、Viveの接続を外してください。
T5トルクスドライバーを使って、ヘッドストラップのマウントをヘッドセットの両側に固定している12mmネジを2本外します。
ネジが外れた時、マウントが落下することがあります。パーツの紛失にご注意ください。

	[title] Unscrew the head strap mounts
	[* icon_caution] Be sure to power down and disconnect your Vive before beginning.
	[* red] Use a T5 Torx driver to remove the two 12 mm-long screws securing the head strap mounts on either side of the headset.
+	[* icon_note] For some devices, a T6 Torx driver may work better.
	[* icon_note] The mounts may fall off when the screws are removed, so be careful not to lose any parts.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.