How To Solder and Desolder Connections için Bekleyen Düzenlemeler

Crow Ryan (42) tarafından düzenlendi 16 Oca 2025

(Bu düzenlemeyi denetlemek için yeterli itibarınız yok.)

	0-black-Congratulations—you've created a solder joint! Inspect the joint to see if it formed correctly:
	1-red-*Leaded solder joints* should look like a shiny, concave tent surrounding the entire lead.
	2-icon_note-If the joint isn't shiny, it may not have formed correctly. Reheat the joint briefly and allow it to cool.
	1-orange-*Lead-free solder joints* should look like a concave tent surrounding the entire lead. They may be shiny or dull.
	1-icon_note-If the solder joint doesn't surround the entire lead, reheat the joint and add more solder.
	1-icon_note-If the solder looks like a round bead instead of a concave tent, it didn't bond to the component lead. Reheat the joint and try to get the lead hot enough so the solder bonds to it.
	1-icon_note-Check if any solder unintentionally bridged with a different joint. If so, apply some flux and reheat one of the joints to carefully break the bridge. If the bridge doesn't want to separate follow [guide\|173873\|this step\|stepid=370680] and use solder wick to pull away any extra solder.
	0-icon_note-Like any skill, practice makes perfect. If your first solder joint doesn't look picture-perfect, that's OK! It takes a few attempts to get the hang of the movement and timing.

	[* black] 恭喜你——你已经创建了一个焊点！检查焊点是否形成正确：
-	[* red] ~~含铅焊点看起来应像一个闪亮的凹形帐篷~~，包围着整个引线。
+	[* red] 含铅焊点看起来应像一个闪亮的凸起帐篷，包围着整个引线
	[* icon_note] 如果接头不光亮，则可能成型不正确。重新加热接头，然后让其冷却。
	[* orange] 无铅焊点看起来应该像一个凹陷的帐篷，包围着整个引线。它们可能闪亮，也可能暗淡。
	[* icon_note] 如果焊点没有包围整个引线，请重新加热焊点并添加更多焊料。
	[* icon_note] 如果焊料看起来像圆珠而不是凹陷帐篷，则表示它没有与元件引线粘合。重新加热接头，并尝试使引线足够热，以便焊料与其粘合。
	[* icon_note] 检查是否有任何焊料无意中与其他接头桥接。如果是这样，请涂抹一些助焊剂并重新加热其中一个接头以小心地断开桥接。如果桥接不想分离，请按照[guide\|173873\|此步骤\|stepid=370680]并使用吸锡线拉走任何多余的焊料。
	[* icon_note] 和任何技能一样，熟能生巧。如果您的第一个焊点看起来不完美，那也没关系！需要尝试几次才能掌握动作和时间。