Eşyalarını Tamir Et Topluluk Mağaza

Samsung GT-E1200I Teardown

Yazan: Stefano De Rossi (ve 4 başka katılımcı)
Yayımlama: January 27, 2021
  • Yorumlar: 2
  • Favoriler: 0
  • Görüntülenme: 719

Samsung GT-E1200I Teardown

Yazan: Stefano De Rossi (ve 4 başka katılımcı)
Yayımlama: January 27, 2021
  • Yorumlar: 2
  • Favoriler: 0
  • Görüntülenme: 719

Sökmek

Neye ihtiyacın var

Bu teardown bir tamir kılavuzu değildir. Samsung GT-E1200I cihazınızı onarmak için, servis kılavuzumuzu kullanın.

  1. Samsung GT-E1200I Teardown, Remove the back cover and the battery: adım 1, 2 resimden 1. Samsung GT-E1200I Teardown, Remove the back cover and the battery: adım 1, 2 resimden 2.

    • I have used the Jimmy for this job.

    • Be careful when you pry with your Jimmy. It can hurt you if you use it the wrong way.

    • All the tools featured in this guide are available in the Pro Tech Toolkit.

    Düzenle

  2. Samsung GT-E1200I Teardown, Remove the inside panel: adım 2, 3 resimden 1. Samsung GT-E1200I Teardown, Remove the inside panel: adım 2, 3 resimden 2. Samsung GT-E1200I Teardown, Remove the inside panel: adım 2, 3 resimden 3.

    • Use a Phillips #00 screwdriver to remove the three screws.

    • Pry and remove the panel with an opening pick.

    Düzenle

  3. Samsung GT-E1200I Teardown, Speaker: adım 3, 1 resimden 1.

    • Remove the speaker with a spudger.

    • Do not force it off. If you do, you could break your speaker.

    Düzenle

  5. Samsung GT-E1200I Teardown, Vibracall: adım 4, 1 resimden 1.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Remove the vibracall engine with the tweezers

    Düzenle

  6. Samsung GT-E1200I Teardown, The mainboard: adım 5, 3 resimden 1. Samsung GT-E1200I Teardown, The mainboard: adım 5, 3 resimden 2. Samsung GT-E1200I Teardown, The mainboard: adım 5, 3 resimden 3.

    • Remove the mainboard with the spudger:

    • Move on side here for detach the screen

    • Pull up here for remove the mainboard

    • The screen is soldered to the mainboard. If you are replacing your screen, you need a desoldering iron.

    Düzenle

  7. Samsung GT-E1200I Teardown, The keyboard: adım 6, 1 resimden 1.

    • Separate the rubber side of the keyboard from the rest of structure

    Düzenle

  8. Samsung GT-E1200I Teardown, That's all: adım 7, 1 resimden 1.

    • It's all done!

    Düzenle

Yazar

4 tane daha katılımcı ile

Stefano De Rossi

Üyelik tarihi: 11/30/18

468 İtibar

2 adet Kılavuz yazıldı

Rozetler: 2

2 Yorum

I have a samsung GT-E1200I and the port for the charger has died on me. I’ve tried it on several chargers and

there is no signal. I plugged it in and it just went dead. The problem is, I need to get the numbers I had. Is there any way of doing this?

edward - Yanıt

The numbers are maybe stored in the SIM? Have you tried to move the SIM on another phone?

Stefano De Rossi -

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 6

Her zaman: 719