Ana içeriğe geç

Neye ihtiyacın var

Bu teardown bir tamir kılavuzu değildir. Samsung Galaxy S8 cihazınızı onarmak için, servis kılavuzumuzu kullanın.

  1. Samsung Galaxy S8 Teardown'ı, Samsung Galaxy S8 Teardown'ı: adım 1, 3 resimden 1. Samsung Galaxy S8 Teardown'ı, Samsung Galaxy S8 Teardown'ı: adım 1, 3 resimden 2. Samsung Galaxy S8 Teardown'ı, Samsung Galaxy S8 Teardown'ı: adım 1, 3 resimden 3.
    • Samsung, ekran boyutu tercihlerinizden bağımsız olarak aynı akıllı telefon deneyimini sağlamaya çalışıyor gibi görünüyor ve Galaxy S8'in özellikleri bunu ele veriyor. Bunlar size tanıdık geliyor mu?

    • 5,8-inch çift kenar, 2960 × 1440 çözünürlüklü Super AMOLED ekran (570 ppi)

    • Qualcomm Snapdragon 835 veya 4 GB RAM'li Samsung Exynos 8895 prosesör,

    • 12-megapiksel oto-fokuslu, 4K video çekimi yapan arka kamera; çift 8-megapiksel selfie kamerası

    • 64 GB dahili hafıza, 256 GB'a kadar MicroSD kart ile yükseltilebilir.

    • IP68 su geçirmezlik sınıfı

    • Android 7.0 Nougat

  2. Samsung Galaxy S8 Teardown'ı: adım 2, 3 resimden 1. Samsung Galaxy S8 Teardown'ı: adım 2, 3 resimden 2. Samsung Galaxy S8 Teardown'ı: adım 2, 3 resimden 3.
    • Boyutları bir yana, S8 ve S8+'ın görünüşleri birbirine oldukça benzer şekilde klonlanmış. Özellikleri şunlardır:

    • Hoparlör ızgarası ve mikrofon deliği

    • USB-C şarj girişi ve kulaklık jakı (Apple: 0 Samsung: 1)

    • Nabız okuyucu/flaş aksamı

    • Arka kamera

    • Parmak izi okuyucu

    • S8, S7 Edge'den devşirme, ürünün güvenli bir evrimi - oranlar, kamera ve sensör paketi konumu ve boyutu tamamen aynı.

  3. Samsung Galaxy S8 Teardown'ı: adım 3, 3 resimden 1. Samsung Galaxy S8 Teardown'ı: adım 3, 3 resimden 2. Samsung Galaxy S8 Teardown'ı: adım 3, 3 resimden 3.
    • Galaxy bir kez daha cam üstü cam tasarımıyla ortalığı yıkıyor ve hayatımızı zorlaştırıyor. Paneli ısıtıp yerinden ediyoruz ve bir sürü açma penası uyguluyoruz.

    • Kenarını bir kere açtıktan sonra, iSclack yardımıyla şahane yapıştırıcısından içeri doğru kıvrılıyoruz (yapıştırıcı daha sonra tekrar monte etmede gerekli olacak - *öööfff*).

    • Ve işte S8+'ın içine girdik - mi acaba? Bu arkadaş bildiğin aynı.

    En el cristal trasero, ¿un mensaje oculto? ;P

    Nasher87 - Yanıt

  4. Samsung Galaxy S8 Teardown'ı: adım 4, 2 resimden 1. Samsung Galaxy S8 Teardown'ı: adım 4, 2 resimden 2.
    • Parmak izi okuma sensörü arka kasada yaşıyor, pek bi’ karmaşık yerleştirilmiş. Bu şeyi (sağ elinizle) kullanmak, körü körüne kamerayı ittirmeyi ve kirletmeyi gerektiriyor.

    • İyi haber, bu sensör hareketli ve yerinden kolayca çıkartılıp, kendi yapışkanıyla tekrar yerleştirilebilir. Gerekli olan tek şey biraz ısıtıp, iyice ittirmek.

    • Parça değişiminin, cihazı kilitleyip kitlemeyeceğini (iPhone 7'de olduğu gibi) (henüz) bilmiyoruz.

    I have replaced the finger print sensor and it remained fully functional.

    dylan - Yanıt

  5. Samsung Galaxy S8 Teardown'ı: adım 5, 1 resimden 1.
    • S8+, kardeşi S8’de de olduğu üzere, çok amaclı pek tatlı bir donamıma sahip. Hoparlör/anten dizini ve anten/NFC bobini aksamı, telefonun orta şasisinde çifte görev üstleniyor.

    • Ayrıca S8+ gibi, NFC anteni, MST (Güvenli Manyetik Aktarım)’yi taklit ederek, herhangi bir kart okuma cihazının bulunduğu ödeme noktasında Samsung Pay'in kullanımını sağlıyor.

    • Neredeyse söyleyecek pek bir şeyimiz kalmadı – telefonun geri kalan kısmı S8+’a epey benziyor. Adeta, birisi S8+’ı yıkanırken cebinde unutmuş da telefon çekmiş gibi görünüyor, ama hâlâ kullanılabilir boyutta kalmış.

    Temperature sensor on charging coil chip

    Chrome Os - Yanıt

  6. Samsung Galaxy S8 Teardown'ı: adım 6, 3 resimden 1. Samsung Galaxy S8 Teardown'ı: adım 6, 3 resimden 2. Samsung Galaxy S8 Teardown'ı: adım 6, 3 resimden 3.
    • Samsung’un yıldızlı rekor kıran pillerinden sonra, otomatik fırlatma sistemli bomba piller üreteceklerini düşünürdünüz değil mi? Öyle değil işte, bu piller sıkı (baya sımsıkı) yerleştirilmiş.

    • Ve çıkartması zor bir pil üretmesi o kadar da özel bir şey değil – bu artık tüm telefon dünyasında mevcut.

    • Samsung markalı pil, 11.55 Wh'da, Google Pixel’in 10.66 Wh’sı ile karşılaştırılabilir, ancak (biraz daha küçük) iPhone 7’nin 7.45 Wh pili yanında cüce kalır.

    • Kapasite karşılaştırması etkileyici görünebilir, ancak raporlar gösteriyor ki gerçek performans pek de neşelendirecek cinsten değil.

    Others have noted that removing the battery is a lot easier (and safer!) using dental floss

    Michael M - Yanıt

  7. Samsung Galaxy S8 Teardown'ı: adım 7, 3 resimden 1. Samsung Galaxy S8 Teardown'ı: adım 7, 3 resimden 2. Samsung Galaxy S8 Teardown'ı: adım 7, 3 resimden 3.
    • Bu son model Galaxy telefonun I/O kart konektörü, anakartın altında. Çünkü, neden işler daha da zorlaştırılmasın ki?

    • Anakartın kendisi görece daha kolay çıkıyor, bu da bize bir Samsung stardı olmuş ısı borusuna göz atmak için fırsat veriyor.

    • I/O yardımcı kart birleşenleri, hareketli kulaklık jakına kadar S8+ ile örtüşüyor.

    • Kameranın saçmalıklarından daha önce bahsettiğimiz için, gelin direk ciplere bakalım.

  8. Samsung Galaxy S8 Teardown'ı: adım 8, 1 resimden 1.
    • Acaba gerçekten de S8+’ın küçük ikizi mi diye, S8’in genetik çiplerine baktık.

    • Samsung K3UH5H50MM-NGCJ 4 GB LPDDR4 RAM, MSM8998 Snapdragon 835'in üzerinde bir tabak olarak yer alıyor.

    • Toshiba THGBF7G9L4LBATR 64 GB UFS (NAND flaş + kontrolör)

    • Qualcomm Aqstic WCD9341 ses kodeği

    • Skyworks 78160-11

    • Avago AFEM-9066

    • NXP 80T71 NFC kontrolör

    • Silikon Mitus SM5720 Interface PMIC

    S8+'da olan UFS 64GB bellek ile S8'de olan 64GB UFS bellek uyumlumu, S8 deki belleği S8+'a aktarabilirmiyim?

    Arda - Yanıt

  9. Samsung Galaxy S8 Teardown'ı: adım 9, 1 resimden 1.
    • Karşı tarafında ise şunları bulduk:

    • Murata KM6D28040 Wi-Fi Modül

    • Qualcomm PM8998 (PM8920'ye benzer)

    • Qualcomm WTR5975 RF alıcı-verici

    • Avago AFEM-9053

    • IDT P9320S

    • Maxim MAX77838 beraberinde PMIC (MAX77829'a benzer)

    IDT P9320S should be for wirless charging

    austin6869tw - Yanıt

  10. Samsung Galaxy S8 Teardown'ı: adım 10, 1 resimden 1.
  11. Samsung Galaxy S8 Teardown'ı, Son Düşünceler: adım 11, 1 resimden 1.
    • Samsung Galaxy S8, bizden 10 üzerinden 4 tamir edilebilirlik değerini kazanıyor (10, en kolay tamir edilebilir demek):

    • Birçok bileşen modüler ve bağımsız olarak değiştirilebiliyor.

    • Pil değiştirilebilir, ancak sert yapışkan ve yapıştırılmış arka panel işi gereksiz yere zorlaştırıyor.

    • Ön ve arka cam çatlasın diye iki kat hassas yapılmış ve her ikisinde de güçlü yapıştırıcı, iç kısımlara herhangi bir tamir için erişimi zorlaştırıyor.

    • Kavisli ekran nedeniyle ön camı, ekrana zarar vermeden değiştirmek aşırı zor.

Bu çevirmenlere özel teşekkürler:

en tr

64%

Gözde dünyayı onarmamıza yardım ediyor! Katkıda bulunmak ister misiniz?
Çeviriye Başlayın ›

41 Yorum

With the release of the Samsung Galaxy S8 and S8+, Samsung has begun building new "Wizard Lounges" at which Samsung officials can personally tell you "your phone is broken, buy a new one!"

George A. - Yanıt

+1 for the best review I have seen on this so far.

Kendall Paisley -

Very nice Photography!

Tecnopolis Magazine - Yanıt

I would like to know how heavy the battery is compared with the S7 battery and how big (volume) it is

Henning Holthusen - Yanıt

From memory, (did a teardown just recently,) the S8 Battery is significantly heavier than an S7 battery. It is quite a bit thinner however, so the added weight must be caused by the internals. I'm no expert on battery composition but I know for sure that S8 batteries are much more durable from a repairers point-of-view.

Harry Rowse -

Am I right in observing that the charging port flex module no longer has button ribbons that fold around the mid-frame and underneath the glass?

If so... techs everywhere are rejoicing right now.

kyle - Yanıt

Correct! That alone makes for a significantly more repairable phone. Once you get an S8-series phone open, removing the daughterboard/charging port is totally straightforward.

Jeff Suovanen -

So, I know a lot of you are going to be !#^&@@, but I got my S8 in the mail yesterday. I cracked the back glass about 45mins ago. Do any of you have any idea how much it is going to cost to fix it?

Johnathan Jones - Yanıt

Wow. Well, heres what I'd say. Your waterproofing is gone. Repairing it yourself is a no go because a replacement back is $100 and I could only find one seller on eBay. http://www.ebay.co.uk/itm/100-OEM-Origin...

Best send it to Samsung, keeping your waterproofing and warranty.

AdamA -

GG MALL Have already selling the S8 back glass one month before the galaxy s8 release LOL

https://youtu.be/kwh0jCFy94g

ggmall -

Also broke the back glass 1st day I had it. Thinking major design flaw, because I haven' t even dropped the phone yet! Can't count the number of times my S7 flew off my lap as I got out of the car without breaking. Don't know exactly when it got broken. Only thing I can think is if I set down the oculus with the phone still in it and the extra weight broke it.

Ed Burie - Yanıt

Have had my S8 4 days and front glass broke today. I was sitting in chair at a meeting using the stop watch and the phone slid off my lap onto a carpeted floor. It wasn't a long fall - was very close to the ground when it happened and it hit softly. I can't find replacement glass parts anywhere online and after reading this, it sounds like I should go the insurance route instead.

drkandcjk - Yanıt

Amazon offers oem replacement parts, in large selections. I was able to purchase a new back glass & new front glass (w tools and a roll of adhesive included) both for under $45. Roughly $20 per item.

Melissa Shupe -

I encounter the same issue less than two weeks of new S8 slipped out my hand with a low drop and craked along the side. Got insurance and replacement was for only $49.99 which I was told there was not a service provided here in las vegas. I was mad as heck !!! and got my refund insurance money back and cancel policy. I checked around town for replacement and was told it would cost over $150.00 for screen replacement which was crazy ridculous. As of today I still using my racked screen . Today I was told that I need a mircophone/speaker fixed and I hate to see the cost for that. These new slim S8, S9 and new cell looks great but easy to break and not worth the price for replacement.

darcar789 -

Any idea US model LCD and touch module is compatible with UK and other international model?

Saurabh - Yanıt

the LCD is the same

ggmall -

Glass is made of sand. How can that piece of crap without even an optimized OS cost more than an iPhone? lol

Doctor Apple - Yanıt

Thanks Bogdan for your riveting reply. The glass isn't easy to remove on its own, but it is possible. It is much easier once you've gutted the phone, as you can bend and twist the frame ever-so-slightly to loosen the adhesive on the device without compromising the LCD. The phone definitely performs well, but its build quality might be a little bit underwhelming to anyone with an eye for that sort of stuff. For the average consumer, eh, who cares about a bit of lag?

Harry Rowse -

Had phone for a couple weeks. Never dropped and take great care of it. Already has a crack on the back around the center of the screen. Maybe from bumping into my keys that might have been in my pocket. How did Samsung think this would fly? Leaving on my desk untouched till I get a super case for this thing. Very frustrating.

flibbertig155 - Yanıt

i feel like shame on you for having a full glass phone and not having some kind of case from the get :( but the main reason that they make the rear panel glass is to enable easy wireless charging. A metal backing would not be able to freely wireless charge.

Mike Craanen Jr -

is there any heat pipe ..... is it more effective than previous models ... specially on VR

jihad khorfan - Yanıt

Yep the heatpipe is still around, you can see it in the second photo on step 7 under the motherboard, looked about the same as the S7 pipe to our eyes.

Sam Goldheart -

Funny to see all these (obviously non LG) users complain about the "difficulties" of using a rear-panel-located button. Here's a simple trick that might make you feel stupid: step 1) with your right hand holding the phone, place your index finger on the rear edge of the phone (the left side if the screen is facing your--the side the fingerprint reader is closest to); step 2) slide your finger until you feel the fingerprint sensor. VOILA!! No need to smudge up your camera.

FixNcell Phone Repair - Yanıt

The curved screen really has no advantage, and actually catches reflections much worse.

Peter Zpat - Yanıt

I had this phone for 2 days and it slid off of every surface I placed it on, unless the surface was perfectly flat . This is a defect in the design. It is too slippery to use without a case. Now I have a cracked back case and have probably lost wayerproofing. I am going to complain to Samsung.

Ralph - Yanıt

Hey Ralph!

I have noticed some S8 handsets do actually have concave rear panels. It is very very slight, barely noticeable to the naked eye. The only way I've tested it is with a small ball bearing. The bearing would always roll directly to the center of the rear panel. Because of this, the phone sometimes builds up an air cushion, making it slide like an air-hockey puck. A case for these phones is an absolute must! They are 95% made up of extremely fragile glass, probably intentionally. If Samsung refuses warranty, and offers service, do your best to decline, and check out a local third party repair store. Rather give local business a chance over Samsung!

Harry Rowse -

Hola!, tengo un S8+ modelo G955F, se daño el integrado Qualcomm WTR5975 RF Transceiver, quiero saber donde lo puedo conseguir?

Tecnocell Ventas - Yanıt

I have dropped my device 2 times with basic Verizon case that came with it and worthless screen protector. Sounds like I got lucky no cracks. I ended up putting qmadix liquid screen protector $39 since regular tempered glass wouldn't adhere. I like the surface the qmadix has made 9H Sapphire hard seams last 2 weeks no scratches,less smudges, easy to apply no bubbles and antimicrobial!!!

Adam Lindenfelser - Yanıt

Is it possible to replace the WiFi module? My phone is 3 months old and the WiFi will not turn on. Took it to Samsung Experience Store to have it flashed and it came back from them as "rooted" and now Samsung won't touch it

Scott Binder - Yanıt

this taredown doesn't show the front facing camera module or the iris scanner.

Philip Perry - Yanıt

Can I use s8 battery to replace s6 or s7 battery?

Affandi Ali - Yanıt

what is the sram of this device

ne so - Yanıt

my phone entered in a safe mode and after the maintenance man remove the safe mode but after opened the phone for removing safe mode I can not charge my phone and the message is the charging will stop now because your phone is cold and will resume charging after getting warm my phone : Samsung S8+

Ahmad m homsi - Yanıt

Can I change the frame alone without having to change the display with it? I ask because i just dropped it and even though it has a case the frame is scratched and i would like to change it but i can’t find a frame without the glass.

Кристина Стоянова - Yanıt

Anyone try adding a magnet plate for the magnetic carmounts under the back glass? Would it fit?

Pedro Pablo Fortes - Yanıt

Is there enough room to add a magnetic plate under the back glass in order to use it with a magnet car mount?

I know it would interfere with wireless charging, just interested in know if one would fit under there.

Thanks!

Pedro Pablo Fortes - Yanıt

I have my s8 phone and today it slid off and the front glass has smashed (Touch screen) and i wanna know how much it costs me and which is the best store to do that

wasfi shari - Yanıt

Samething happened to me a few weeks of purchasing new S8 last year. I was told over $150.00 for replacement screen which is crazy. Today trouble shooting told me my speaker not working and I cannot imagine the cost. New design cells is easily to break and costly . After this contract done or if I decide to pay off ahead of time I’m going back to an older cell and doing prepay no contract or track phone. done with all cell provider which a big ripoff and lies.

darcar789 -

At wich temp the glue will loose its grip?

is a common hairdryer sufficient?

boosnie - Yanıt

@boosnie Hair dryer and patience will work fine. It takes quite a bit of heat to soften the glue securing the rear cover. Remember, this is a teardown, not a guide—the guides are over here. ;)

Jeff Suovanen -

I manage to replace a few of the galaxy s8 screen while removing only 3 screw !! I made a small video about it. it’s not perfect but you should save at least half the time while replacing it!!!!

https://youtu.be/3Cw3imiqdj4

Jeff Gravel - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 21

Son 7 gün: 112

Son 30 gün: 515

Her zaman: 302,248