Toshiba Click 2 Pro P35W-B3226 Teardown

Yazan: Sasa Macura (ve 5 başka katılımcı)

Yayımlama: March 19, 2015

Topluluk-Katkılı Kılavuz

Yazan: Sasa Macura (ve 5 başka katılımcı)

Yayımlama: March 19, 2015

Topluluk-Katkılı Kılavuz

Sökmek

Giriş

This guide will show how to take the back housing off the Tablet portion and the keyboard cover.

Aletler

Bu teardown bir tamir kılavuzu değildir. Toshiba Satellite Click 2 Pro cihazınızı onarmak için, servis kılavuzumuzu kullanın.

After this procedure there seemed to be more back light bleed on my tablet. Not sure if it was there before so be careful.
Remove the tablet from the dock.
Find the best place to insert your plastic pry tool (I used the Micro-SD slot). Carefully go around the perimeter of the tablet and unclip the back cover.
Take note off all the clips. The back cover is held in place with a ton of these all around.

With the keyboard separated remove all the screws in the bottom. The top 4 screws are longer then the bottom 6.
Keyboard back cover Part #ZYE35CZ1BA0100140810-01 REV:3A
Keyboard boards and weights.

The keyboard dock board. Looks like there is a way to add a second HDD/SSD here but the connector is not soldered on.
Keyboard board Part #CZ1D30E51001CC
Mouse board, left-hand weight, front LED board.
Re-assembly in reverse order.