Bu kullanıcı henüz profilini doldurmadı.
Sorular
I was wondering if anyone has attempted to connect a VGA cable to thunderbolt cable and if you know if its easy. I have...
Devamını okuCevaplar
i know this is an old thread but i have a cousin with 2010 air and wants back light has anyone else attempted this or know how to do just wondering if i could safely do and make him happy
Devamını okuMight be S.O.L. On that one unless you can find a dead board that's identical to your board and are really good at soldering and unsoldering. You can try ghetto rigging it some how to stay down just be sure using stuff that is non conductive or anti static. And make sure you unplug battery while you are ghetto rigging it.
Devamını okuUsually that loading bar means running disk check or trying to recover from a power save deep sleep. Charge battery for a while then do smc reset and pram reset then Try holding option key at boot and try going to recovery partition run disk check and repair disk permissions see if that work if still doesn't work try using installation disk again sometimes when booting to CDs it takes a ridiculous amount of time seen it take as long as half hour just to boot to a dang cd so be patient and wait up to 45 min to be safe if still doesn't work. If have another Mac you can try to boot with the other macs hd in yours and vise versa. To verify if can boot to either drive. Then if not try to get your hands on an apple hardware test cd for your model of laptop test hd and ram
Devamını okuIf capacitors are on logic board you are pretty much S.O.L. Even if we're able to identify them how would you solder them back on.
Devamını okuMaybe the battery indicator needs to be replaced if not then mobo is toast
Devamını okuTry the replacing the battery indicator on side of machine by the hd if same issue then board issue
Devamını okuYa if power button doesn't work then will have to replace top case for sure i do apple repairs and very common after liquid spills to take out just power button or will have to short every time to turn on
Devamını okuIf you are able to get green light on adapter you can try smc reset left shift control option and power at same time might fix it make sure the MagSafe on the mobo is fully seated and make sure seated properly to side of case to get full contact with adapter also unplug battery try seeing if can power on with just adapter if nothing works might be motherboard issue or faulty battery indicator on side of machine. Check underside of motherboard for liquid damage or anything noticeably wrong if nothing find new board online or ask Apple store to do exchange with apple for new board
Devamını okuPut on a hard surface like a desk if still thermal shutting down either has dist in fan blocking air flow or need to apply new thermal paste to processor
Devamını okuMay want to do smc and pram resets as well
Devamını okuSayfa 1 / 2