Oh, I can't look. My computer is torn apart... hope my Google photos has my teardown…

My ribbon cable has blue on both ends… it came apart when I opened the laptop... I don't know which end goes to which side… one end has heat shrink tubing on it… p55w-b5112 I will need to go back to my own photos from a prior teardown, to see where the hear protected part of cable should be…

Satelite P55w-B5112

I also need the part number. The lower left of glass is broken, so air bubbles are big and triggering “touch"es…

Did anyone find out how to remove bubbles? Or just replace the inner screen - I assume the top layer of glass is kept? Only the inner screen gets replaced? Because the bubbles are along the non-black part of the display… I know that the bubble started as 1 tiny smudge from opening it with one hand… now there are multiple bubbles that interfere with operation. At times, the bubble sends a “click” because the screen flashes a zillion times until I restart it - its like having a stuck key except the stuck key is the bubble……

Since it is getting worse, I need to replace the part that has the bubble embedded. I don’t want to buy a new laptop, when its just a screen, and possible a fan (2nd time replacing it - but i run on ssd so it’s not as critical since it does not get hot ).

Ditto - looking for how to perhaps remove the glass and reattach w/out air bubbles. Or - which part do I need to replace - minimum, not the whole top half of my laptop. thanks satelite p55w b5112 how to repair air bubbles under screen