Öğrenci Katkılı Viki
Bu vikiyi, eğitim programımızdan harika bir öğrenci ekibi yaptı.
Connection Problems
You have trouble connecting your camera to Wi-Fi.
Faulty Adapter
This problem occurs when the camera is unable to pick up the WiFi signal. The probable cause for this problem could be a faulty Wi-Fi adapter within the camera.
Weak Signal
A weak signal where the device has been mounted can cause connection problems.
Not Set up With Mydlink Acoount
The camera has to be set up though a d-link account to work properly. Elsewhere several users had difficulties when trying to connect the camera using the mydlink home app. Download app
Make sure have that WiFi connection is always connected with camera for the camera to connect correctly. The App works for most smart phones with internet capabilities.
You will find the camera’s Wi-Fi name and password on Quick install card “come with camera on the box.
- Connect the camera to your Wi-Fi network
- Add your camera to a mydlink account
- Access your camera from the App
Motion detection malfunction
Camera fails to detect movement.
Camera Sensitivity
Make sure the sensitivity is in a fitting range. If sensitivity is higher than it is supposed to be this will cause false alert.
Under Setup in the camera interface is where you can manage sensitivity. On the left side, click on Motion Detection, select Enable. Under Sensitivity, enter a percentage. The higher the number the easier the motions will be detected.
Camera too Close to Windows
Set the camera up away from windows. Shadow light movement seems to cause false detection. So setting the camera away from windows can help.
Low quality videos:
Camera is recording grainy or blurry videos.
Not Enough Memory
Use a big memory storage to get more high quality videos.
Not Staying Connected to Wi-Fi
Make sure the camera is always connected to the WiFi and the signal is strong.
Too Close to Windows
Place the camera indoors and away from the glare of windows or glasses.
LED Lights:
This indicator is used to show the availability and strength of the wireless networks. Some users have reported blinking of the indicator while others would like to turn it off.
What the Different Lights Mean
The led lights describe the status for the camera : Blinking Orange means ready but not connected to the WiFi. Solid Green means the camera is connected to the WiFi. Blinking Red LED will blink during the reset process. To replace or remove the indicator, use this guide
Check the password status during the connection
You may need to put the password in again to connect to Wi-Fi.
Not Recording To MicroSD:
You can’t get the camera to record onto SD cards, or any can only get snapshots but not videos.
Not Set up in D'link Account
The most likely cause of being unable to record on a microSD card is that it has not been set up through the camera’s dlink account. This can be done through selecting the settings option for the camera and scrolling to advanced settings in your dlink account.
SD isn't Formatted Correctly
Some users have found that it is not formatted correctly and shows there is no space on the SD.
Open an internet browser and type the IP address of your camera into the address bar. When prompted, enter the username and password for the camera (The default username is admin with no password) Click the Setup Tab and then click SD Management on the left side. Click Format SD Card
Faulty Firmware
The installed firmware may have uploaded incorrectly, or is out of date. Open a web browser, and enter your cameras IP address. Enter your camera's username and password. Click on Maintenance > Firmware Upgrade. Then click Browse, select the downloaded firmware, and then click the upload button.
Ekip
Idaho State University, Team S4-G2, Watkins Fall 2017 Idaho State University, Team S4-G2, Watkins Fall 2017 üyesi
ISU-WATKINS-F17S4G2
3 Üyeler
10 adet Kılavuz yazıldı
55 Yorum
How can I set this up on my phone
Pamela Hodges - Yanıt
Wi-Fi not connecting to my phone.
Pamela Hodges - Yanıt
The camera is connected with WPS, at the light is green. But when I go into the app and want t add a camera, is says:
Cannot connect to camera, Follow the setup guide to restore the connection.
What to do???
Jannie Sørensen - Yanıt
Cameras not recording to cloud during some events… will record before and after
Steve - Yanıt
Mine too, it always seems to miss critical events and times when I've needed to use footage as confirmation there has been people coming and going, it has failed to capture it.
Jennaye -
Same here! My mom has dementia, so having the cam record motion is super important.
tina.cormack -
Keeps saying error when signing in
Heidi Betrock - Yanıt
Im trying to add a new camera and it gets to the point of getting device info and then times out.. I have done this before, it usually resolves itself after a few tries. I have been trying to connect for 2 hours now
averyduran - Yanıt
I get to putting in my password and thats as far as i get, it just spins…why?
wlw2 - Yanıt
Hi! I need help, I got a DCS-8010LH camera, but it seems that wont turn on, I dont know if it the adapter o what, but the LED light wont turn on in any color, Im trying to paired it with the app but it seems like just doesnt give any signal at all. I dont know if its the adapter. Does it needs to get charged before use it? Thank U
Florencia Garcia - Yanıt
i want to throw this piece of crap out my window and drive over it with my car and then put my car in reverse and drive over it two more times.
dnmiller1 - Yanıt
936l wont connect to wifi either.Junk
George Watt -
I am certainly willing to help you on this since I did the same to all dlink cameras I had (4 pcs). Worst purchases ever!!!
Worst interface
Terrible application
Crap analysis
Unstable performance!
Never be able to see what I wanted!!!
JOHNKOUYIOS -
Worked for 3 days then it died, havent been able to connect again just flashing orange forever network interface dissapeared, reset doesnt work, garbage product produced way to cheap, the code is terrible aswell :/
Jakob Kristensen - Yanıt
why does my video keep freezing
maria adamo - Yanıt
I can’t live view, but can look at the recording.
What is causing the live view not to load
Terry
Terry - Yanıt
I live in another state and my d-link stated it is off line. I can not unplug camera from my phone. How can I get it back on line from my computer?
lmtcb3 - Yanıt
This was working fine when I bought it (yesterday!) After I got it set up (finally!) But between 5 & 6 this morning it quit and won't record or anything. Total grey screen!
nhonea81 - Yanıt
i have lost my factory password for DCS-800L
how do i get it?
kashi - Yanıt
Shortly after firmware update, my 936 will not show video in remote mode “ due to network error. Please try again later “
Camera operates fine in local mode.
Any ideas.
evaltran - Yanıt
I opened my app and somehow put an x on my camera- how do I remove this?
Linda Bornschein - Yanıt
error code 0.70_1_5_32_0_
Alvin Wong - Yanıt
camera is not connecting with WPS
kinyamba_alain - Yanıt
The setup-connection problem, DCS-936L-50D6 Dlink Camera, We change to the Camera Wifi as instructed and the orange light is flashing, but we’re notified that “No Camera is Detected” Please make sure you’re logged into the Camera Wifi and the orange light is flashing, try again. We’ve done this at least 20 times. Does anyone have a solution for this?
Using iPhone 7 Plus Software version 13.1
Thank you,
Eric
Eric M - Yanıt
Am having exactly the same problem here, with two units of my 2530L model, sigh.
Kenneth Chang -
My 8010 will not get past binding
Robert - Yanıt
I just bought one and I went to put an SD card in it and SD card went inside the camera now I don't know how to get it out…… went past SD card slot in into the actual camera and Slidin moving all around inside of it
Timothy Brennan - Yanıt
Hi Timothy
to remove the SD card all you have to do is press on the card as if you are trying to push the card further into the camera it is spring loaded and should pop out a little. Still need a strong grip to withdraw the SD card.
I hope this helps.
Terry -
i have a 5020l 0lder camera and it turned to garbage. i tried to get it to work 50 times and nothing.
mtam548 - Yanıt
My camera was easy to set up and it worked for a few days, but now it just won’t stay connected to the wifi no matter where I move it to. Yet everything else in the house that relies on wifi is fine.
maugail - Yanıt
my camera worked great then I moved and now it works local but does not work on remote setting :( it said to reboot and I did many times with no luck please help!
kristadenton1969 - Yanıt
Mydlink account is setup my app is up to date my camera reconnect send the light is red the camera pans to the left all the way until it clicks and pans up straight up Set It Off trailer for a while and shut off no lights I've tried to reset it for 15 seconds holding the reset button I tried to reconnect to it many different ways no luck anything I do won't work it's almost like a camera stopped working any help would be greatly appreciated this is a text to speech grammar punctuation does not matter happy face
Chad Buckingham - Yanıt
My dlink camera has been red (not blinking).
the resetting, main power on/off did not help.
is the camera now dead? Please help/advise. Thanks.
Tee - Yanıt
Hello i have a dcs-930L which will not connect wirelessly with my wifi unless i use cable. i have tried everything i know. However it will connect to an extender which bears the settings of my network. What a puzzle ! Please help
iokaradimos - Yanıt
Hi! I noticed your post because I have the same camera and same exact problem. Did you ever figure out the cause? Thank you!
Wendy S -
I have a dlink camera that doesnt display any feed? It shows on my dlink dashboard as being connected. The green lights are on. Any suggestions as to what could be the problem? I have done all the delete/restart
Susan Thieleman - Yanıt
How to turn off alarm on my d link hub?
herbert_duya - Yanıt
I can't get my camera connected!!
Cindy Peterson - Yanıt
not warked not wifi canect
jauharisingh802 - Yanıt
how to connect to wifi n instead of g
rkapur700 - Yanıt
Hi..I previously had both my cameras,set up with bell Canada…I changed carriers now xplornet and I have the ax3000 router good signal but I cannot get my cameras on wifi and my Bluetooth will not Pair..prior my Bluetooth did pair..also I tried hooking up to Alexa…not working…eed this device to work..ty..
carolannbest - Yanıt
I have everything set up correctly plugged and set up to my Wi-Fi one problem I'm having 1 minute delay when UPS delivery shows up at my front door step leaves my package at the door gets into his vehicle drives away which I can hear him driving away I'm looking at the camera I'm just seeing him put package at the front door step but he's not at the door so there's a minute delay need to fix it
Gerald Holt - Yanıt
I have 3 cameras and only can cloud record just one. DCS-2530L and DCS-936L are installed and I can see them but only can record on SD. Both cameras are not in the list of cloud record.
Alejandro Garcia Cano - Yanıt
another account is logged into the device
Dalton Kennedy - Yanıt
I bought it to hear my dog barking and was told that I would be able to and would be able to speak to the dog but though it is recording movement it is not recording sound
Liz Moynan - Yanıt
Camera freezes, then when you logout and login again you get a black screen with a circle rotating. Also getting message to turn on data to get better streaming. Customer service says need WiFi booster, now camera does not work even sitting beside router. Will never buy again.
Wendy Young - Yanıt
Sounds like mine. Black screen with screen with circle. When you go into settings everything has a spinning circle. It's junk
Jennifer Jisko -
I have 3 cameras. One always shows live feed from remote, the other 2 normally work super but intermittently wont connect, just the spinning icon. Why?
F P - Yanıt
When viewing my Events or Live no matter what. When. Or where, or which device, I am shown only half the picture while the other half is totally and completely black? Hadn't used cam long at before suddenly 1 day this is how it appeared and I've gotten absolutely no where with any of the techs/ reps. Can anyone help me with this?
Brittany Tackett - Yanıt
MY DCS -8302LH alarme is too late once it alerts me the camera is too late could be 10 to 30 minutes late what to do thanks
richard - Yanıt
Picture is sideways and when I click for full screen image it’s upside down. Turning the orientation of my phone does not correct the problem. The camera sits on the floor and is stationary. The company no longer provide support for the 8300 LH. Any ideas gratefully accepted
Janets - Yanıt
This camera is complete junk. My mom had a stroke and I NEED a reliable camera. When I log in it's a black square with a spinning circle. When I go into settings every option is a spinning circle. Move it closer to the router? I need it to be where my mom is not next to the router. Getting replaced ASAP
Jennifer Jisko - Yanıt
Try TP-LINK Tapo cameras!! I replaced all dlink I had with this!
JOHNKOUYIOS -
Too much bad camera and quality and the price expensive to much. Some time or always the camera been hot and not clean video. If you changed your internet Wi-Fi they blocked your camera has been red light you can’t connect again. Support the company same support in the supermarket they don’t no really bad stuff and camera.
al----katby - Yanıt
Agrred 100%
Worst cameras I ever bought
JOHNKOUYIOS -