Eşyalarını Tamir Et Topluluk Mağaza

Model A1297 Unibody: Early 2009, Mid 2009, Mid 2010, Early 2011 & Late 2011

544 Soru Tümünü görüntüle
Soru Kapandı

Seçenekler

Unpacking a replacement MATT screen

The replacement matt screen I received appears to have protective cover over the face. However, it is tight to the face surface and very carefully (almost precisely) taped on all edges with cutouts at the connection points; enough so that I'm concerned that I may have received a glossy screen, not the matt screen I ordered. Am I being overly cautious and I should go ahead and remove the tape and get on with the repair?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Check your part number on the back.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3

1 Yorum:

got it; thanks.

BTW, the protective cover over the screen is so perfectly and sized that it looks like it is under the edge tape. I have the right part, now on to the repair.

Any suggestions on lifting the ultra thin aluminum bezel without boogering it up?

tarafından

Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 298