Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3291 Soru Tümünü görüntüle

Ear speaker mesh transfer

I need to know how to transfer the mesh from one iPhone screen to another, This applies to all Iphone's.

Once taken off the old screen the adhesive is to little or not sticky to reapply, And to small too use my usual two sided tape.

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

Nintendo Switch Kit'leri

Oyuna geri dönmek için hızlı bir düzeltme

Switch Kit'leri Satın Al

Nintendo Switch Kit'leri

Oyuna geri dönmek için hızlı bir düzeltme

Switch Kit'leri Satın Al

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

The Original Adhesive applied by Apple is the classic two sided adhesive they use throughout the iPhone. Just glue it on if you want, even Rubber Cement will work or use some thin cuts of two sided adhesive. If is not important how you fix it there, just do it.

Bu yanıt yardımcı oldu mu?

Puan 2

Yorumlar:

Is there any negative effects long term by not having the dust cover on there? Like damaged speaker's?

tarafından

Well the opening in the glass is large, you don't want debris entering your iPhone here. Also the port to the true earspeaker is large, you don't want things like sand-like particles entering it. But actually no cover would not be too bad. But it is so easy to transfer the true speaker mesh, or to just cut some thin fabric or cloth to cover the hole would be very easy.

tarafından

Thanks for you're help

tarafından

Yorum Ekle

Yanıtını ekle

David sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 2,253