Eşyalarını Tamir Et Topluluk Mağaza

1.83, 2, or 2.16 GHz Core Duo processor

281 Soru Tümünü görüntüle
Soru Kapandı

Seçenekler

CPU Temp spike after SSD install

I put a Samsung SSD into my MBP yesterday. After doing so, my CPU temp spikes dramatically, hitting about 240F before shutting down. I thought it may have had to do with indexing the new drive, so I installed SMC to run the fans at full blast, then put it outside to see if it would get over the hump after indexing, but no dice.

I tried booting from the original hard drive via USB to see if that would help, but got the same result.

What should I be looking for, if anything, when I reopen the machine?

Thanks, and Happy Thanksgiving!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
1 Yorum

What happens when you take it out and if needed put you old HD back?

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

In general you CPU temp shouldn't change unless a process is running. You could look at Activity Monitor to see what process is using up the CPU cycles.

It's possible you have a bad SSD or cable as well here.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

3 Yorum:

i'll fire it back and try to look at activity monitor before it shuts down. i haven't dropped the old HD back in yet to see if that stops the madness. thanks for the tips. i'll let you know if there's a resolution!

tarafından

good call on the activity monitor. MDS and MDSWORKER were running at 100%+. i disabled indexing and we're back to reasonable numbers. thanks!!!

tarafından

Happy you isolated down the cause. If your all set here can you score & mark the question as answered - Thanks!

tarafından

Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 2,053