Mid 2010 Model A1278 / 2.4 or 2.66 GHz Core 2 Duo processor

793 Soru Tümünü görüntüle

Broke camera cable when replacing DC board

I followed the guide for replacing the DC magsafe board (MacBook Pro 13" Unibody Mid 2012 MagSafe DC-In Board Replacement) and it worked. However, I botched step 9 and pulled the camera cable out of its metal connector.

Is there a guide or part for replacing the camera cable?

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

I'd seek professional help. Replacing the cable is a much more complex task than the DC-in board, and you had problems with that DIY repair. A professional may be able to reconnect/replace the broken connector, eliminating the extensive chore of replacing the cables.

Soldering computer components is a very advanced DIY skill requiring special tools, solder and lots & lots of practice.

If this Answer is helpful please remember to return and mark it Accepted.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

macyabbey sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 2

Her zaman: 253