Ana içeriğe geç

Model A1419 / Late 2013 / 3.2 & 3.4 GHz Core i5 or 3.5 GHz Core i7 Processor, ID iMac14,2

340 Soru Tümünü görüntüle
Soru Kapandı

Can I add an HDD to an SSD only iMac?

So I have the 512GB SSD model, and I wish to install an internal 4TB HDD. Will any HDD work, or does it need to have a special firmware? Also, what kind of connector or cable do I need? I've read about special "thermal" cables.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Well you do have some work here. As this system is so new I doubt many people have even opened one up yet. Luckily IFIXIT has! In reviewing the late '13 teardown you can see the layout and on the most part the internals are very similar to the late '12 model.

Given the fact you got a SSD only model I don't know if the HD SATA cable present or not, if it is you should have an easier time putting in the HD.

Here' the IFIXIT guide to replace the HD on the '12 model iMac Intel 27" EMC 2546 Hard Drive Replacement. If it is missing you'll need to follow this guide to put a new one in iMac Intel 27" EMC 2546 SATA Cable Replacement.

Please tell us what you find if the SATA cable is missing or not.

iMac Intel 27" EMC 2546 SATA Cable Görseli

Kılavuz

iMac Intel 27" EMC 2546 SATA Cable Replacement

Zorluk:

Zor

1 - 2 hours

iMac Intel 27" EMC 2546 Hard Drive Replacement Görseli

Kılavuz

iMac Intel 27" EMC 2546 Hard Drive Replacement

Zorluk:

Zor

1 hour

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 3

Her zaman: 670