Eşyalarını Tamir Et Topluluk Mağaza

GSM version of the fourth generation of iPad released November 2, 2012. Model Number A1459 / 16, 32, or 64 GB

43 Soru Tümünü görüntüle

Seçenekler

Need to know differences between iPad 3 and 4 PCB(interconnection)

Does anyone know differences between iPad 3 and 4 PCB(interconnection) board? I am looking around and have only been able to find the interconnection board for the iPad 3 wifi, I need an interconnection board for the iPad 3 Cellular GSM. The only one I have found seems to be dual listed to work in the iPad 4 as well. I have trouble believing that.

On the cellular version one of the antennas plugs into this board.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Interconnection board? you mean the headphone jack board maybe?

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

3 Yorum:

The headphone jack is soldered to this board. The antennas plug into it as well as the power buttons.

tarafından

It is the sensor panel assembly, it houses the headphone jack, front camera/ALS, mic, gyro/accelerometer, rear camera, front end modules for one of the antenna, buttons and compass sensor. A lot of ipad3/4 parts are interchangeable, this could be one of them. I don't have the schematics for iPad 4 so I can't say for sure.

tarafından

Okay thank you.

tarafından

Yorum Ekle

Seçenekler

The headphone jack in ipad 3 cellular is not soldered to anything, so I guess that is one difference :)

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

Hi Jessabethany, after review it does appear that the headphone jack is soldered to the board in question.

tarafından

Yorum Ekle

Yanıtını ekle

David sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 836