Eşyalarını Tamir Et Topluluk Mağaza

All screwdrivers manufactured by iFixit and sold on iFixit.com

22 Soru Tümünü görüntüle

Seçenekler

Are the TR10 and TR8 screwdrivers interchangeable with T10 and T8?

Hi!

Thank you for your great guide! I have a question regarding the Torx screwdriver sizes. I own a toolset that includes T6, T8, and T10 sizes as well as a few others. In your guide, it is listed that a "TR10" and a "TR8" screwdriver is needed. After watching several videos pertaining to hard drive replacement, many people claim that they are using the standard T10 and T8 sizes. Is there any difference between the "TR" labeled screwdrivers and the standard "T" ones? I don't want to have to buy these two screwdrivers if the ones I currently own will work. Please advise. Thank you!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 4
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Here's a breakdown of the more common bits:

Block Image

The TR (Tamper Resistant) Trox screw has a pin in the middle of the hole so a standard Torx bit can't grab the screw.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 6

3 Yorum:

Thanks! Great diagram. I just put in an order for the TR Torx screwdrivers.

tarafından

The TR drivers might be able to work with standard Torx screws, but not visa versa. In about twenty years of working on Macs, I have never actually needed any of my TR drivers. None of the repair-guides I have found acutally calls for a TR driver - perhaps Sebastian has encountered a typo?

tarafından

Johann, Mac Mini 2018 is using TR6 screws.

tarafından

Yorum Ekle

Yanıtını ekle

Sebastian sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 7

Son 7 gün: 64

Son 30 gün: 243

Her zaman: 22,825