Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

The PlayStation 3 Slim is the second version of the PS3 video game console produced by Sony Computer Entertainment. It was released September 1, 2009.

362 Soru Tümünü görüntüle

ps3 Bd drive replacement vs remarry

my ps3 slim bluray drive is not reading blurays. It reads dvds without an issue.

So just replacing the bluray drive with the correct model will help?

Or is it necessary to remarry the drive? Please help.

Update

thanx. I am kind of lazy so am thinking of swapping the whole drive. Dont want to open it. That being said, my question is, is it adequate to replace the BD drive with the correct model? Or should i remarry the drive after swapping? Forgive me if this is a silly question. I am kind of a novice in these things.

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

LCD iPhone Ekran Tamir Kit'leri

Ömür Boyu Garantimiz kapsamındaki bütçe seçeneği.

Shop Kits

LCD iPhone Ekran Tamir Kit'leri

Onarım maliyetlerini düşürün, kaliteyi değil.

Shop Kits

3 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hi,

First you can try to clean the laser lens. This manual is for a different device, but the operation is similar (the PS3 laser unit have 2x lens).

Laser Lens Cleaning

After this, you must to change the laser lens unit.

Regards.

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

thanx. I cleaned the laser and it worked. reading BDs without an issue.

tarafından

Yorum Ekle

hi yes this can be resolved by removing the blue ray drive and replacing

the laser. serial number must match.when i inspect i make sure the drive is in the eject position so puting together dont go wrong ive learned before lol.

sorry but to get the serial number, you need to separate the drive to make sure you order the correct laser.

you can also buy the complete laser and deck for ease of replacement just make sure the numbers match.

if you just want to replace the whole drive remove the circuit board from the old bl drive and apply to the new drive.tho double check numbers match there are different variations.

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

cleaned the laser and worked for me. thanx

tarafından

Yorum Ekle

Please I need help.

I got a used ps3 slim cech-2005 on custom firmware 4.82 and runs multiman.

The problem is it doesn't read discs. Tried both Blu-ray and DVD and nothing showed up on xmb.

The blue light in front of the disc slot remains on when a disc is inserted. I can feel the disc spinning endlessly. The clock symbol on the top right corner rotates for some seconds and stops.

Multiman xmb shows a disc is inserted, but can't load it.

Lens replaced but exactly same problem.

When be drive is open, blue lens and red lens light up when disc is inserted.

What could be the problem?

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Anish Thomas sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 12

Son 30 gün: 40

Her zaman: 3,497