Eşyalarını Tamir Et Topluluk Mağaza

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2522 Soru Tümünü görüntüle

Seçenekler

How to replace/desolder iPhone 5 SIM card reader?

Hello,

My iPhone 5 always seems to say "No SIM" even when inserting several SIM cards and cleaning the tray and internals. I strongly believe this is a SIM card reader fault, hence please may I ask how I would do about de-soldering and soldering on a new SIM card reader on the iPhone 5?

I looked at several resources online and they have given me a general idea since there aren't many guides online, hence could I please ask you guys for more specifics on how-to? I apologise for the bother.

Thank you ever so sincerely! :)

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 8
Yorum Ekle

6 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Alright, I guess I'm gonna throw my hat into this crisis of misinformation. So, OP, if you don't have a smd work station and experience in soldering, this is not for you. What you should do is look into a GOOD board repair shop that can do this, and if that's worth getting a used iPhone 5. The phone that's next on the list to become extinct. Sounds like a $75 purchase on Craigslist. This particular repair would be difficult, especially because of the plastic components. I do have a technique for this, but still, not easy. Not for a beginner for sure. The only person who made an ounce of sense was that David F guy. The rest are not things that remotely make sense

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle
En Yararlı Yanıt

Seçenekler

It is not an easy task the problem are the 2 solderpads hidden under the sim contact made in a plastic frame

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3
Yorum Ekle

Seçenekler

If you have to ask i don't think you will be able to do it, it's not easy to resolder such a tiny component. My bets advice to you is get an old circuit board, I use a RROD Xbox 360 and practice soldering onto it.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Seçenekler

https://www.youtube.com/watch?v=7o6f_zq2...

This video showed it pretty good for me atleast! Hope you all the best!

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Seçenekler

That video didn't show how to do anything. However, I just started looking into this but I imagine you wouldn't actually "solder", you'd use a heat gun. Any time there's multiple solder points, it's usually best to use a heat gun to soften the solder.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Seçenekler

I suggest to bring the unit to iPhone service center and let them fix it for you.they were more competent than us since it was their kind of job

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

2 Yorum:

How much would that cost?

tarafından

They don't microsolder at Apple. They sell you a new phone

tarafından

Yorum Ekle

Yanıtını ekle

Arif Ullah sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 24,861