İtibar: 25
1
I obtained a Fisher non-operable stereo amplifier model number RS-914A but I've noticed some of the capacitors were missing and possible other parts. I'm looking to rebuild it but need to know what parts are required so that I can purchase and apply them to the circuit board. I've looked everywhere online and I can't find anything helpful, so a part list would be majorly helpful.
Bu iyi bir soru mu?
İtibar: 782,8b
1,1b
893
2,3b
kevinkeyser96, here is a small start. Based on your images this is what I got so far:
C275 Capacitor 1000uF 35V
C276 Capacitor 1000uf 35V
C277 Capacitor 6800uF 75V
C278 Capacitor 6800uF 75V
those are electrolytic caps.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 1
Son 7 gün: 3
Son 30 gün: 4
Her zaman: 923
11 Yorum
you are looking at probably 2-300 parts. I suggest that you post images of your boards where the components are missing. It might be easier to identify it that way.
oldturkey03 tarafından
How do I do that? I don't see an option for camera.
kevinkeyser96 tarafından
Adding images to an existing question
oldturkey03 tarafından
Okay, this is a start. Is there any chance you can get your images somewhat stabilized? The motion blurr makes it pretty much impossible to identify what is missing. Right now I can make out about 4 capacitors that have been removed. Take multiple close ups and see if you get the reference designators (numbers on the board) on the images. Looks like a pretty big job. Are you ready for all of this? Have you considered to replace the complete boards? I am all up for fixing things, but sometimes it's just to big of a chore. Just asking....
oldturkey03 tarafından
Yea honestly it's just a hobby of mine :p I'll get those pictures up in just a bit
kevinkeyser96 tarafından
6 tane daha yorum göster