Ana içeriğe geç

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2522 Soru Tümünü görüntüle
Soru Kapandı

iPhone 5 keeps rebooting after water damage

Hope you can help me out, my iPhone fell into the water. After this my iPhone will only boot up when the charger is plugged in. Then it boots up every 3 seconds. So I openend up my phone and I saw the following was missing:

Block Image

Is this the problem?

Or should I replace my U2 ic?

Hope anyone can help me out!

Thanks in advance!

Thomas.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Thomas, yes that is a part that could be the cause for it. It is reference designator FL10 which is a 120OHM 210MA fixed inductor in a 01005 package. Go with that first. It's a lot easier to replace that one than U2. Make sure that you clean your board properly with isopropyl alcohol etc. while you are replacing the inductor.

Bu yanıt yardımcı oldu mu?

Puan 0

2 Yorum:

Really, you are so great! Thanks! One last question, think you hear this one a lot, where can i find and order the 120 OHM 210MA fixed inductor?

Again thank you very much!

tarafından

Of all places, you can get it from Amazon Of course, my choice would be this one.

tarafından

Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 459