Eşyalarını Tamir Et Topluluk Mağaza

Third generation of iPad, featuring 4G capabilities, released on March 16, 2012. Model number A1430. Repairs require heat and careful prying.

106 Soru Tümünü görüntüle

Seçenekler

Replaced digitizer works for few days then nothing

I have replaced the screen of my iPad 3 A1430. This is the 2nd screen as the first one didn't work at all. This new one worked great for a couple of days I then noticed the screen has lifted up a bit so added a little heat from hairdryer, moving it round all the time. It has not stopped responding to touch. I have taken apart and put back together but no response. Any help would be appreciated

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1

1 Yorum:

Hi guys any ideas would be appreciated

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Make sure that the cable isn't getting pinched between the glass and aluminum chassis. Also inspect the connectors where the digitizer cable plugs into the logic board and make sure the connector tabs are flipped down all the way and there is no damage. It is a tight squeeze getting the cable in and out of there.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Deniseo sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 74