How to fix ethernet plug recognition?

Question

iMac Intel 27" EMC 2309 & 2374

iMac Intel 27" EMC 2309 (Late 2009, Core 2 Duo 3.06 or 3.33 GHz) ID iMac10,1, EMC 2374 (Late 2009, Core i5 2.66 GHz or Core i7 2.8 GHz) ID iMac11,1

467 Soru Tümünü görüntüle

Matthias Lamoureux @matthiasla51716

İtibar: 9

1

Gönderildi: 20 Tem 2010

Seçenekler

How to fix ethernet plug recognition?

Hello,

When I plug an ethernet wire (plugged to a switch with a printer, wifi access point, etc) the network is not recognized. On the Network configuration, the Ethernet dot is still red. And on the switch, the lignt in front of the Quad Core iMac line is off... I used several wires, the several ports of the switch, but nothing...

Under Mac OS X 10.6.4 I see the en0 device, under Windows 7, I see the Broadcom card (but still unconnected) and everything seems alright... Except that when I plug it does nothing...

Any idea ?

Thanks in advance,

And sorry for my poor english.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan -1

Yorum Ekle

2 Cevap

Seçilen Çözüm

Jeff DeVaun @jeffdevaun

İtibar: 347

6

1

Gönderildi: 20 Tem 2010

Seçenekler

either the nic on your mac is bad or your switch is bad.

if the port that your printer is plugged into is working try plugging your mac into that port.

If it still does not work and your sure your cable is good then your nic is faulty.

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 1

3 Yorum:

what's a nic?

mayer tarafından 20 Tem 2010

Hi Richard--network interface card--a windows device primarily. Ralph

rj713 tarafından 20 Tem 2010

Well, it seems that the nic is dead... Well, what now... Can I change it myself, or is it included on the motherboard ?

Matthias Lamoureux tarafından 21 Tem 2010

Yorum Ekle

Hi Richard--network interface card--a windows device primarily. Ralph — rj713
Well, it seems that the nic is dead... Well, what now... Can I change it myself, or is it included on the motherboard ? — Matthias Lamoureux