Ana içeriğe geç

Guides for the Wi-Fi version of the iPad Mini 2. Announced October 22nd and released November 12th, 2013. The iPad mini 2, also known as the iPad mini with Retina Display, has all the pixels of the iPad Air in a smaller 7.9" form factor.

220 Soru Tümünü görüntüle

Missing solder pad on Touch screen connector iPad mini 2

Hi guys,

We have a problem.

A customer brought an iPad 2 mini. I disassembled ipad, and I realized the touch screen connector was damaged. I removed the connector with solder iron, but one of the solder pad are missing.

what is the solution ?

thanks

Tibor

picture:

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

3 Cevap

Filtre ölçütü:
Seçilen Çözüm

This is all wrong !!! The missing pad is 5th pad !! 5 NC - no connection !!

Block Image

Yellow selection is pad 6,

Block Image

oldturkey :D

Bu yanıt yardımcı oldu mu?

Puan 2

7 Yorum:

@fixlab excellent job in finding this. Amazingly enough it took a year for somebody to catch this error. I did correct the original answer.

tarafından

No problem ;)

tarafından

@fixlab I have the same problem. The pads number 5, 15, and 17 are missing. Colud you help me with the schematic picture? Where could I connect the missing pads? Thanks!

tarafından

gabor, pin 5 is nc, pin 15 is ground and 17 you can connect to the large cap to the left side of the connector. on the right side of the cap

tarafından

Thank you daniel!

tarafından

2 tane daha yorum göster

Yorum Ekle
En Yararlı Yanıt

Iphoneszerviz Szeged, correction. That is contact #5 of J1700. It does not need anything. NC no connection

Block Image

Bu yanıt yardımcı oldu mu?

Puan 6

6 Yorum:

Very useful, Thank you!

tarafından

By placing a jumper from the cable to the board?

tarafından

thank you old turkey, :)

tarafından

@oldturkey03 extremely grateful!

tarafından

@iphoneszerviz, did you manage to repair this? Can u post a pic or explain a little what you had to do exactly? We are facing a similar prblem ourselves with the exact same pad ripped off during a connector replacement

tarafından

1 tane daha yorum göster

Yorum Ekle

Iphoneszerviz Szeged,

try to use best or recommended rework tools when you touching high tech logic boards. Here i can see one path Path damaged on your logic board.

you have two options,

1) Change the new logic board

2) Path modification : check the path destination and you may have to connect them physically

All the best!

Bu yanıt yardımcı oldu mu?

Puan 2

3 Yorum:

circuity diagram available this iPad?

tarafından

creativeelectron (http://creativeelectron.com/) seeking your support to find path of 8th contact - TP

tarafından

jessabethany, seeking your support as well

tarafından

Yorum Ekle

Yanıtını ekle

Iphoneszerviz Szeged sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 5

Her zaman: 4,723