Eşyalarını Tamir Et Topluluk Mağaza

Seçenekler

This TV wont power on.

Set will not power on, i get only two blinking red lights . No sound or video coming from set.

Update (08/24/2016)

I am unable to post a photo of the PSU. However, Visual inspection shows no swollen and/ or leaking Caps.

The standby voltage reads 3.3 v dc a the standby pin. Thank you tremendously for your help!

Update (08/24/2016)

NSX40GT1 psu from my TV

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Ooo Oooo the 2 blink code indicates an over-current condition at the psu outputower supply board's outputs. Possible cause is a connection to either a failed board or (and most commonly) a fault of the PSU itself. Could be as simple as a failed capacitor. Check for any leaking or domed cap. Post some images of the power board with your question. Use this guide for that. That will allow us to see what you see.

Block Image

Reference Number 201 is the PSU board

Block Image

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Yanıtını ekle

Ooo Oooo sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 328