Ana içeriğe geç

Repair guides and support for all-in-one washer and dryer assemblies as well as stacked units.

140 Soru Tümünü görüntüle

Why is the dryer making a horrible noise

I have a frigidaire combo washer dryer, that is a few years old but hasn't been used a lot. The dryer developed a really bad sound metal on metal type scraping. When I looked inside the dryer I noticed there were two screws (out of 3) that had worked their way out of the center back (inside the dryer). Not sure if those screws were the cause of the noise or the result of it. I haven't tried doing towards fixing it for fear of making it worse.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
1 Yorum

@theresatay what model is your combo and try to post some images of whast you see with your question. For that use this guide Adding images to an existing question It will allow us to see what you see and we wont have to guess.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Theresa, The 2 of the 3 screws that you have found may be the screws that hold the drum centered in the machine on the drums hub shaft. If you or a friend can reinsert and tighten the screws, do it and try machine.

If you put the screw/bolt in the hole and it just spins, this probably means that this fastener wash installed as a nut, lock washer and bolt to drum hub. In this case the machine will have to be disassembled and you may want to have a technician have a look and estimate repair. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

Is there directions on doing it yourself?

tarafından

Yorum Ekle

Yanıtını ekle

Theresa Taylor sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 36

Her zaman: 2,128