Eşyalarını Tamir Et Topluluk Mağaza

Mid 2012 model, A1278 / 2.5 GHz i5 or 2.9 GHz i7 processor.

1624 Soru Tümünü görüntüle

Seçenekler

SSD in optical drive

I'm planning to replace my optical drive in my mid 2012 MacBook Pro 13inch with an SSD.

Both optical and main bay are capable of 6gb (SATA III), with main bay currently at 3gb negotiated and optical and 1.5gb negotiated.

Would I be ok to put the SSD straight into the optical drive and boot off it and have my current HDD remain where it is and be a secondary storage?

Any advice would be appreciated.

Will I notice any speed difference with the SSD being in optical?

I'm worried about the HDD not having motion sensor if I put it in the optical bay.

Another alternative is getting two SSDs and running striped RAID.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Well, you are going to face two different issues here:

  • Moving the HD to the optical drive port will loose crash guard protection as only the HD port has it
  • Your systems optical SATA port has a known issue running at SATA III (6.0 Gb/s)

OK, so what to do??

I would recommend either going with a larger SSD (1 or 2 TB) or going with a hybrid HD (SSHD) replacing the HD and calling it a day. We don't try to setup dual drives in this series as its just not worth the hassles.

Here's a bit more on the optical carrier issue: OWC Data Doubler. It makes no difference who's you go with as the problem is within the logic board.

As for SSD any SATA III (6.0 Gb/s) drive will work here for the swap out. We have gone with Samsung 850 EVO's as our standard as they have a good warranty and are a bit faster than most of the others, but they are more expensive than the others.

As for a hybrid drives: Seagate, Western Digital & Toshiba all make 2.5" SSHD drives. We use Seagate SSHD with 32 GB of flash as our standard. We focused on the Seagate drive as it is backwards compatible with SATA I & SATA II systems unlike the other drives.

Hope this answered your questions! Good Luck!

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

5 Yorum:

Thanks for your reply Dan!

If I don't use that much storage do you think I could get away with a 500-750gb SSD?

tarafından

Sure if you leave 1/4 of the space free.

Unlike HD's, SSD's do wear, leaving the free space allows them to wear more evenly.

tarafından

Thanks so much for our help Dan. I just have one last quick question. Would you reccomend leaving TRIM disabled? I think the Crucial SSD I got has inbuild garbage collection.

Thanks again

Nick

tarafından

Yes, I would enable TRIM services. Here's a small writeup the Crucial has on their onboard garbage collection and how it works with TRIM: TRIM and SSD performance: why is it important?

tarafından

Thanks again dan.

Hopefully my main bay will support SATAIII and I won't have to update the cable.

Cheers

tarafından

Yorum Ekle

Yanıtını ekle

Nicholas Presgrave sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 273