Model A1174 with 2 GHz Core Duo or Model A1207 with 2.16 or 2.33 GHz Core 2 Duo

276 Soru Tümünü görüntüle

The wires of the HDD thermal sensor cable connector came out

I pulled the wires out of the connector on the logic board in step # 17 off the HDD replacement. Does anybody now the right order to get the wires in the connector.

Or mayby is their a picture of the hdd thermal sensor cable in which I can see where each wire should be in the cnnector??

TIA Henk

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0

Yorumlar:

I saw the picture in #17, but I ment a picture of the entire cable so you can see how the wires are connected.

But does anyone now where to buy such a cable in the Netherlands??

Henk

tarafından

Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Here's a picture in step #17: iMac Intel 20" EMC 2105 and 2118 Hard Drive Replacement

Problem is the wires are all the same color. When I pulled them out I connected them back in the same order as on the sensor. It worked for me once, the next time I just order a new one in.

Bu yanıt yardımcı oldu mu?

Puan 2

Yorumlar:

good answer +

tarafından

Yorum Ekle

Yanıtını ekle

Henk sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 1,276