Ana içeriğe geç

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Soru Tümünü görüntüle

Change tristar and trigis but cannot detect to computer

Hello i am have problem of iphone 6

That Iphone always restart and cannot be charge. After that i change, ic u2 or tristar and trigis. It can charge batterai now but, after i plug to the computer it cannot detect , itune cannot find .... can anybody help me...

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
1 Yorum

Check the mail voltage rails for shorts. (PP_VCC_MAIN, PP_BATT_VCC, etc.) does any part of the phone get hot?

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

If your device is not recognized by iTunes but works well otherwise, then it is probably an issue with Tristar. You will need to remove it again, check all the pads and surrounding components and install a new one.

Bu yanıt yardımcı oldu mu?

Puan 2

1 Yorum:

Sorry for commenting on the old reply.

My ipad pro 12.94th gen is showing similar symptoms. It can be charged, but it is not detected by PC at all. (I tried replacing the dock flex cable by disassembling the ipad, but the symptoms didn't change. I used every means such as replacing usb cable/PC.)

Is this also likely to be a problem with USB ic like tristar? (in ipad pro, Probably the CD3217B12 chip is USB ic)

tarafından

Yorum Ekle

Yanıtını ekle

bennyw2w3 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 194