Ana içeriğe geç

Mid 2012 model, A1278 / 2.5 GHz i5 or 2.9 GHz i7 processor.

1624 Soru Tümünü görüntüle

Broken iSight cable (pulled out of connector)

I pulled the wires out of the iSight camera cable at the logic board the connector is still in place I just pulled the cable out of the connector. How do I fix that?

MacBook Pro (mid-2012) 13"

Thank you

Update (03/09/2017)

Picture

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 4
2 Yorum

Could you please send photo

tarafından

Uploading a picture

tarafından

Yorum Ekle

4 Cevap

Filtre ölçütü:
Seçilen Çözüm

you need to replace the entire webcam with cable, which is difficult because you need to take of the entire display assembly and then separate the glass from the rest of the toplid.

Bu yanıt yardımcı oldu mu?

Puan 1

7 Yorum:

Ya I'm good on all that I don't need the camera that bad

tarafından

You might want to use tweezers to push the broken connector out of the socket though. On some years it causes an issue with sensors, so the fan spins high speed

tarafından

issues with fans are only when temp sensors are disconnected.

tarafından

Fan is good I monitor it also with temperature of the CPU

tarafından

On a good note it's only reaching 63 degrees C under heavy load.

tarafından

2 tane daha yorum göster

Yorum Ekle

What are the effect of a broken isight camera cable on macbook 2012 pro …apart from camera….

I need answers thats based on sensor, relation of display back light

Bu yanıt yardımcı oldu mu?

Puan 1

2 Yorum:

i also wanna know.. because my computer suddenly cant find the wifi..

tarafından

same situation here. Tore out the socket and was wondering if I really need to fix it.

tarafından

Yorum Ekle

I have been using it without the connector for the past 1 year. All I notice for the difference is no more camera and mic is not working for me. I'm wondering if the mic has to do with the isight port or my mic just coincidence to breakdown at the same time. The rest like fan and sensors was not affected at all. I'm using a A1278 MBP.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Hi Guys i have the same problem on macbook pro 13 late 2011 and I cant find a way to remove the connector. Any ideas please because thats must be the reason that my fan works like crazy. Appreciated any help!!

Block Image

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

That 's so hard to get it out. I using the cuter . Look at the side of socket. You found the space between the plug. So using the blade insert between that and Try to push the socket out. Please try the both side left and right. Until the socket going out.

tarafından

Yorum Ekle

Yanıtını ekle

Collin.nesbitt@gmail.com sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 11

Son 30 gün: 39

Her zaman: 7,275