Eşyalarını Tamir Et Topluluk Mağaza
Onarım Topluluğuna Katılın - Hesap Oluşturun

16 Eylül 2016'da satışa sunulmuştur. Model 1660, 1778 GSM ya da CDMA olarak 32, 128 ya da 256 GB kapasitelerinde ve Altın Gülü, altın, gümüş, siyah ve simsiyah renklerinde satılır.

20 Soru Tümünü görüntüle | 78 Parçalar Mağaza

Seçenekler

iPhone 7 Dead On Arrival

iPhone 7 came in. They said it wouldn't come on, and has been off for weeks. I installed a new display, and decided to test a known good battery, instead of waiting for the old one to accept a charge. It does not come on, and the board is extremely hot. I unplugged and left on the charger for 20 mins. Doesn't come on, but doesn't get hot either. I'm concerned about leaving it unattended on the charger. Also I tested the display and battery on a different phone. All seems good. Her old display comes on, LCD is trashed. There are some holes in the glass, but top left, not too right, where the board is and no signs of water damage

@refectio @oldturkey03 @mayer I forget Bens tag @benjamen50

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Go bare board and add modules until you understand what is drawing excess current. If it's just the bare board, then start at the beginning and look for shorts or partial shorts. It sounds like this phone took a beating so it could be anything really.

BTW it's @refectio ;>) (maybe we should create a @TheMedinho account ...naw, TPTB might not like it )

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 4

9 Yorum:

Don't have a bare board, or anything like that, really, for this situation. How could I have messed that up!?!?!

tarafından

My plan at this point @refectio, is to first get consent from the customer, which I don't really need as the board is pretty messed. Tear off the shields and see if I can get any kind of an answer. Gotta put those needles back on my leads

tarafından

I meant connect just the board with nothing but the battery (and after, the dock) and see if things still heat up.

tarafından

Sorry, I misunderstood after our conversation of bare boards. Getting it out now, and seeing what's going on @refectio

tarafından

Yep @refectio no display, just charger and board, gettin crazy hot. Tried a different Lightning dock. Same answer

tarafından

4 tane daha yorum göster

Yorum Ekle

Seçenekler

Check all the main voltage rails, and can you be specific about what part is heating up? It might burn you accidentally, but the trick I use all the time is to put the board up to my face and see what parts heat up the most.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3

4 Yorum:

It's the top. Yeah, I do that as well. I haven't taken the board out yet. Not super sure if there's any non invasive fixes for this problem

tarafından

Pop it open and use a thermal sensor gun to locate the villain. IR Thermometer

tarafından

Will do tomorrow @mayer after that, I'm gonna guess next will be removing the shields and seeing if anything is missing of out of place, and as @gigabit87898 said doing some testing

tarafından

Yep board is measuring everything above the fpc connectors at 125 degrees farenheight

tarafından

Yorum Ekle

Yanıtını ekle

iMedic sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 5

Her zaman: 582