The Samsung NaviBot SR8855 is a handy autonomous vacuum by Samsung.

13 Soru Tümünü görüntüle

How to disassemble the charger?

By any chance is there a step by step guide how to disassemble the charger? I mean the charging station not the robo itself. I figured out to remove all part but not able to open the big black main unit where actually the fuse and co. is placed :)

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

@ddresch this should work for the power supply. It'll get you to the actual board etc. Once apart post some images of your circuit board so we can see what you se. Use this guide Adding images to an existing question for that.

Block Image

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

Thanks a lot for this chart how to open the charger but my one looks pretty different. My model is the SRR600 charger. Sorry to mess this up a bit.

tarafından

@ddresch post some pictures of what your charger looks like with your question. That way we can see what you are looking at.

tarafından

@oldturkey03 thanks again for your feedback but I gave up on this thing. It's amazing how products are build to be thrown away. I invested more than 3 hours now and gave up. Again thanks for your effort.

tarafından

@ddresch sorry to hear that. Yes, I agree. Sometimes it's better to cut ones loses....best of luck to you.

tarafından

Yorum Ekle

Yanıtını ekle

DDH sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 21

Her zaman: 353