Ana içeriğe geç

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 Soru Tümünü görüntüle

I changed the battery and charging port and it says charging but its n

I installed a new battery and charging port on a iPad 2 and when I go to charge it the light comes on and it shows a lighting bolt and battery with a read line and then it shows a usb with a symble but it won't charge.Why is this.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

If you have access to a USB Ammeter, you could use that to determine if the phone is really drawing current when it says it's charging.

However, it sounds like you have an issue with the charging/USB detection circuit on your logic board. This will require a micro-soldering repair and is not a DIY fix.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

Brian sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 59