Ana içeriğe geç

Model A1136 / 30, 60, or 80 GB hard drive / black or white plastic front

797 Soru Tümünü görüntüle

Can I fix a severed hold switch ribbon?

When replacing the battery on my iPod the battery was so stuck with the adhesive, that when it finally came loose, I severed the orange ribbon cable that goes to the hold switch. As such the iPod thinks it's eternally on hold. Can I fix it?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 2
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Yararlı Yanıt

The ribbon cables are so small and delicate that repairing the ribbon itself isn't really an option. However, replacing the headphone jack/hold switch assembly (30 GB or 60/80 GB) is an inexpensive and easy repair. (If you successfully replaced the battery, this will be easy as well for you).

Good luck!

Bu yanıt yardımcı oldu mu?

Puan 2

1 Yorum:

replacing the hold switch/headphone jack would be your best bet!

tarafından

Yorum Ekle

You could snip the cable to add a finer cut, but this would not let the ipod go into hold, just turn on, and stay on

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

gary sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 10

Her zaman: 4,296