Eşyalarını Tamir Et Topluluk Mağaza

Repair guides and support for full size headphones that encompass the entire ear, also known as circumaural headphones.

108 Soru Tümünü görüntüle

Seçenekler

AudioTechnica AD700X 3.5MM Replacement

Hello all, I had my headphones sitting on a stand on my desk and it fell off forcing the 3.5 jack to break in the computer and I got rid of the case but still have broken headphones. There's a green, red, and copper colored cable and the cables seem to have a fabric feel to them and I don't know if it's safe to solder them into a new jack. I'm not quite sure which is left, right, and ground any help would be appreciated.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Hi @derka

Try the following:

Green to the 'tip" connector.

Red to the "ring" connector.

Copper to the "sleeve" connector.

The convention for 3 pin connector headphones is that the "tip" is the left speaker, the "ring" is the right speaker and the "sleeve" is the return for both speakers.

Block Image

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3
Yorum Ekle

Yanıtını ekle

Derick sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 14

Her zaman: 928