Ana içeriğe geç

Repair information for the Brother MFC-J6920DW wireless, multifunction inkjet printer. Model number: MFC-J6920DW. First available on Amazon in September of 2012.

19 Soru Tümünü görüntüle

Horizontal lines out of alignment.

When i print, horizontal line are a different height every 2"

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0

Yorumlar:

Hello I’ve done this many times since the problem suddenly appeared - some of the nine example squares are identical so it is hard to do! The fault remains in that the printed image is in slightly offset stripes which, as I print music, is frustrating. Any ideas for a global fix? Cheers!!

tarafından

I have been fighting this issue for months….I finally gave up and flushed the Brother printer and bought a new printer from HP. It was TOOOOOO FRUSTRATING tyring to fix with NO LUCK and NO HELP from Brother.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hi @kdglover ,

Try a print alignment and check if this resolves the problem.

Here is a link. Scroll down to the section Checking the print alignment

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

Kenny Glover sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 6

Son 30 gün: 40

Her zaman: 3,429