Ana içeriğe geç

The Comfort Zone CZ6C is a light gray portable desk fan. It has a six inch blade, two speeds, and a hinge mechanism on its neck.

4 Soru Tümünü görüntüle

Can I add a drop of oil to small fan motor? Where?

Fan was working fine. Turned it off. Next time I switched it on, it was trying to get up the power to spin the blade, but couldn't quite do it. The blade would move a fraction of an inch, then no more. I cleaned it, but thought a drop of oil might help lubricate it again. Doable? Where to apply the oil?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

Took it apart, cleaned dust and debris away. Put single drop of sewing machine oil in back of unit, moved motor shaft around to spread oil. Works better than when it was new!

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle
En Yararlı Yanıt

I can find nothing about oiling this motor. Here's the trouble shooting guide on it: Comfort Zone CZ6C Troubleshooting

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

Marge McCoy sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 5

Her zaman: 973