Ana içeriğe geç

The Sceptre Model X9 Komodo VII monitor was released in 2005.

2 Soru Tümünü görüntüle

My T.V. keeps saying no signal!

I've tried unplugging and waiting several minutes on everything and I've tried every HDMI spots too and it keeps saying no signal please help?!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
2 Yorum

Thank you for responding but I figured it out!


What was it bc mine is doing the same thing


Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

sloppy19 sounds like a bad main board. You will have to at least take the back cover of your TV set and take a look at the board. Check for any obvious damage and lose wiring etc. Post some images of your boards with your question so that we can see what you see. Use this guide Adding images to an existing question for that. Also, verify your TV’s exact make and model

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

sloppy19 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 1,432