Eşyalarını Tamir Et Topluluk Mağaza

The March 2015 update of Apple's 13" MacBook Air features fifth generation Intel Core i5 and i7 processors, resulting in slightly increased performance and battery life.

20 Soru Tümünü görüntüle

Seçenekler

Sleep Sensor/ Lid Sensor Location

Currently working on a customer's MacBook which apparently had water damage. Anyway, it keeps going into sleep mode unless I connect it to power and external monitor. Sometimes it realizes the lid is still open then switches back to the MacBook screen. Was wondering if anyone knew where the close lid switches are? I ordered a new upper case thinking the sensors were in there some where but it doesnt appear that addressed the issue.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 3
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

The sensor is on the daughter board, next to the ports there is a thickened PCB with a magnetic sensor on it.

Although I can’t say for water damage, you have to trace the wiring all the way to the SMC to find potential damage that is latching the signal.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 5

3 Yorum:

When you say daughter board, you arent referring to the I/O board where the MagSafe connects too correct? But instead the area where the MacBook screen cable attaches?

tarafından

Just the magsafe part.

tarafından

Thank you! For some reason, I didn't check on the underside of that piece and sure enough when I flipped it over it was corroded out. I ordered another one so hopeful the replacement will fix the issue.

tarafından

Yorum Ekle

Yanıtını ekle

Devin sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 16

Her zaman: 3,593