Ana içeriğe geç

What can I do with my water damaged iPod?

Hi mate,

Unfortunately my apple Ipod 4th gen nano was soaked on water for 8 hours.I knew how to deal electronics, opened all the parts and used electronics solution to clean the parts. After 6 hours I just checked with Multimeter, battery dead and I tried to connect to laptop via usb there was no response. What can I do with this one, shall I try with repair parts like battery replacement or to keep under my desk?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
2 Yorum

go for a new battery and then get back to us. I'm going to send this to the main repair questions, this is just for site maintenance etc

tarafından

This question was migrated from http://meta.ifixit.com/.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

jabarali2009, the way I would proceed is to clean all the parts with isopropyl alcohol and a soft brush. Do not forget the connectors and cables. You can use a hair dryer on the lowest cold settings or a desk lamp to help with the drying. Avoid excessive heat. After that I would definitely replace the battery. The reason why your iPod may not come on when it is plugged in, could be that the battery is shortening out the charging circuit. I'd start with that and do some more trouble shooting after that, if necessary. The new battery will also be a great starting reference for further trouble shooting. Good Luck and let us know how it is going.

iPod nano (4th Gen) Battery

iPod Nano 4th Generation Battery Replacement

iPod nano (4th Gen) Battery Görseli

Ürün

iPod nano (4th Gen) Battery

$13.99

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

jabarali2009 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 4

Son 30 gün: 5

Her zaman: 1,524